Solid Surface Bathroom Builder

Upload your bathroom or shower, calibrate the surfaces you want to change, configure your Formed shower base, and download a production-style design sheet.

Upload your imageSimply upload an image of your bathroom or shower. Ensure the image is clear, shows the entire shower floor/bathroom area, has good lighting, and is not blurry.

Calibrate your Shower/bathroomUsing the calibration tool, outline your shower base/bathroom elements.

Select your colours, outlet type and locationChoose the base profile, Meganite finish, waste type, outlet position and lip configuration.

Download your designOnce you are happy with your selections and measurements, review the installation guide and download your production-style design.

Side labelsMeasurementsOutlet centre

Upload a bathroom image to begin.

Upload image

Upload a clear image of the bathroom or choose from the stock-image library.

Upload image

You can replace the image at any time. Starting with a new image resets the current design.

Shower Base

Calibrate and configure your solid surface shower base.

How to calibrate
Click the four outside corners of the shower base in order: back-left → back-right → front-right → front-left.

Shower base edit tools

Protect an object before or after calibration, erase unwanted finish, paint it back on, or undo the most recent shower-base edit.

Brush size

28 px

No shower-base edits added.

Shower base dimensions

Enter the finished shower-base dimensions in millimetres.

Length (mm) Width (mm)

Your selected base size is not compliant in the 12mm base profile.
Please select the 20mm base profile to ensure a compliant fall to the waste. A suggested option is to reduce the size of your shower base if you would like to have the 12mm option.

✓ Base size is compliant with the selected profile.

Shower base thickness

Base profile

Outlet type & location

80 x 80 puddle flange + chrome trap

Plastic chrome / white screw-in waste

Colour matched flush cap

From left edge to outlet centre (mm) From front edge to outlet centre (mm)

Quick outlet options

Outlet position will be calculated after calibration.

Compliance & fall calculation

Lip profile selection

Configure each side of the shower base. Tap a reference image to enlarge it.

Side 1 Side 2 Side 3 Side 4

Wall lipAdds 30mm (H) to the base. 10mm (W) external wall lip. 5mm (H) × 25mm (W) internal wall lip.

Shower lipAdds 10mm (H) to the base and is 35mm (W).

No lipAdds no additional height to the base. The fall begins >35mm from the base edge.

Partial lip configuration
For every side set to Partial lip, choose the first profile and length, then a different profile for the remaining length. The two values must equal the full length of that side.

Shower base colour

Select the Meganite finish for the shower base.

3D shower base preview

Wall Panels

Add each wall you need.

Add each wall panel, then use its calibration button when you are ready to calibrate it.

Brush size

28 px

You can protect an object before calibration, erase unwanted wall finish with the brush, or paint the finish back if you remove too much.

Wall panel colour

Select a calibrated wall above, then choose its Meganite colour.

Shower Niche

Add your niche measurements.

Calibrate niche
Calibrate the niche back first, then any visible returns or sill.

Niche calibration
Choose the niche plane, then click its four outside corners clockwise. Calibrate each visible plane separately.

Niche edit tools

Edit niche plane

Protect objects before or after calibrating the selected niche plane, then erase or restore finish with the brush as needed.

Brush size

28 px

Niche back selected.

No niche planes calibrated.

Your niche must be in the matching colour of either your shower base, vanity top or wall panels.

Niche colour

A niche must match the shower base, vanity top or wall panels. Only matching colours are available here.

Vanity Top

Add a custom vanity top.

Calibrate your custom vanity top.

Vanity calibration
Click the four outside corners of the vanity top clockwise. Do not trace the basin here — add basin cutouts separately afterwards.

Calibrate a visible finished edge?

Vanity top edit tools

Protect basin fixtures or other objects before or after vanity calibration, erase unwanted finish, paint it back on, or undo the latest vanity-top edit.

Brush size

28 px

No vanity-top edits added.

Basin cutout

If your vanity top includes one or more basins, calibrate each basin cutout so the selected vanity colour never covers it.

Does your vanity top include a basin cutout?

Basin cutout
Click four points around the basin opening in a clockwise order. Add each basin separately.

Outline each basin opening clockwise. Add another basin cutout for double basins.

No vanity planes calibrated.

Vanity top colour

Choose the Meganite finish for the calibrated vanity top and visible edges. Basin cutouts are preserved and will not be covered.

Selections Overview

Select a bathroom element to change the colour.

Bathroom element

Design Overview

Review your design.

View Formed Installation Guide

Solid Surface Bathroom Builder

Redefining spaces.

Shaping better bathrooms.

FORMED SOLID SURFACE